Table of Contents
Advertisement
4-5. How to edit/check the data other than sewing data
The screen for editing/checking the various data is invoked by selecting the menu on the mode screen.
① How to invoke the mode screen.
<Mode screen>
② Selecting the menu.
Select the target menu by pressing
❼ is pressed during selection of a menu, the following screen can be called.
When
1. Memory switch............................Refer to
2. Counter setting ...........................Refer to
3. Sewing pattern management......Refer to
4. Maintenance setting ...................Refer to
5. F key registration ........................Refer to
6. Version display ...........................Refer to
7. Contrast setting ..........................Refer to
8. Communication...........................Refer to
For the functions which are not described in this manual, only the maintenance personnel is allowed
to operate while referring to the Engineer's Manual since operating those functions can lock up the
sewing machine or can cause unforeseen accidents.
❼
❺
❸
❺ .
"4-5-1. Memory switch data" p. 45
"4-5-2. Counter function" p. 50
"4-5-3. How to copy / newly create a pattern" p. 54
tails.
"4-5-4. How to use the warning function" p. 56
"4-5-5. How to use the F key" p. 59
"4-5-6. Checking the version information" p. 62
"4-5-7. Adjusting the contrast of the LCD of the operation
panel" p. 62
for details.
"4-5-8. Communication function" p. 63
Then, keep
onds to display the mode screen.
– 44 –
❸ held pressed for three sec-
for details.
for details.
for de-
for details.
for details.
for details.
for details.
Advertisement
Table of Contents
