Mechanical Section (With Regard To The Sewing Machine); Specifications - JUKI AMS-210ENHL2210/TF10S Instruction Manual

I. MECHANICAL SECTION (WITH REGARD TO THE SEWING MACHINE)

1. SPECIFICATIONS

1 Sewing area
2 Sewing speed
3 Stitch length
4 Feed motion of feeding frame
5 Needle bar stroke
6 Needle
7 Lift of feeding frame
8 Intermediate presser stroke
9 Lift of intermediate
presser
10 Intermediate presser
DOWN position variable
11 Shuttle
12 Lubricating oil
13 Temporary stop facility
14 Max. sewing speed
limitation
15 Pattern selection facility Pattern No. selection method
16 Bobbin thread counter
17 Sewing counter
18 Sewing machine motor
19 Dimensions
20 Mass (gross mass)
21 Power consumption
22 Operating temperature
range
23 Operating humidity range
24 Line voltage
25 Air pressure used
26 Air consumption
27 Needle highest position
stop facility
28 Noise
X (lateral) direction Y (longitudinal) direction
220 mm ×
Applicable tape width : 10 to 16.7 mm
Tape length : 55 to 130 mm
2,800 sti/min (When sewing pitch is 3.5 mm or less)
Factory-set sewing speed at the time of shipment.: 2000 sti/min
0.1 to 12.7 mm (Min. resolution : 0.05 mm)
Intermittent feed (2-shaft drive by stepping motor)
41.2 mm
ORGAN needle DPx17
Max. 30mm
4 mm (Standard) (0 to 10 mm)
20 mm
Standard 0 to 3.5 mm (Max. 0 to 7.0 mm)
Double-capacity semi-rotary hook
New Defrix Oil No. 2 (Supplied by oiler)
Used to stop machine operation during a stitching cycle.
200 to 2,800 sti/min (Scale : 100 sti/min steps)
(Main body : 1 to 999, Media : 1 to 999)
UP/DOWN method (0 to 9,999)
UP/DOWN method (0 to 9,999)
Servo-motor
1,200mm (W) x 780mm (L) x 1,600mm (H)
(Excluding thread stand)
120 kg
360 VA
5˚C to 35˚C
35 % to 85 % (No dew condensation)
Rated voltage ±10% 50 / 60 Hz
0.5 to 0.55 MPa (Max. 0.55 MPa)
3
1.8 dm / min (ANR)
After the completion of sewing, the needle can be brought up to its highest position.
- Equivalent continuous emission sound pressure level (L
A-weighted value of 85 dB; (Includes L
-ISO 11204 GR2 at 2,800 sti/min.
- Sound power level (L );
wA
A-weighted value of 94 dB; (Includes K
-ISO 11204 GR2 at 2,800 sti/min
Time required for sewing: 2.2 sec, using Pattern No. 233
– 1 –
100 mm
) at the workstation:
pA
= 2.5 dB); according to ISO 10821- C.6.3
pA
= 2.5 dB); according to ISO 3744- C.6.3
wA