Emergency Power Supply - Simons Voss Technologies SI SmartLocker AX Manual

SI SmartLocker AX

6.1 Emergency power supply

(Manual)
NOTE
Emergency supply if totally discharged
If you ignore the battery warnings, the SmartLocker AX may fail to open. If
this happens the battery compartment is no longer accessible. You may
connect an emergency power supply for changing the batteries.
1. Turn the screw at the reader's bottom clockwise to push it in (0.9 mm
hexagon key).
2. Remove the cover.
3. Connect a power supply to the mini USB connector (e.g. USB plug, USB
charger, powerbank).
4. Present an ID medium.
SmartLocker AX opens.
9
5. Open the locker, remove the mini USB cable and reassemble the reader.
6. Battery change
25 / 36