Simons Voss Technologies SI SmartLocker AX Manual page 10

SI SmartLocker AX (Manual)
Slotted screwdriver (if the dead-bolt block needs to be replaced)

2.5 mm hex wrench

TX10 screwdriver

ü SmartLocker AX closed ex factory (= dead-bolt extended), programme
Programming [
if necessary (see
ü Door and parts calculated (see
1. Gently press the reader cover against the floor and screw in the lower
screw clockwise until you can lift off the cover (0.9 mm hexagon).
2. Carefully push the light guide down and remove the cover.
8]
).
}
Measurement and calculation [
4. Initial operation
10 / 36
8]
).
}