Section 2 Oncue Plus Operation; Introduction; Information Required - Kohler OnCue Plus RDC Operation

2.1 Introduction

Kohlerr OnCuer Plus monitors the generator set and
generates messages continually. After the application
has been configured to send email and/or text
messages, the OnCue Plus server will continue to send
messages when the PC is turned off or disconnected
from the Internet.
The generator set controller must be in AUTO mode to
communicate with OnCue Plus.
Note: Sample screens are shown in this document.
The actual screens may vary.
Item
User name
Password
Serial Number
Genset Password
OnCue Plus Activation Code
Genset Displayname
Genset Location
Figure 2-1 Required Information
TP-6928 1/14
Description
Create your user name when setting up your account.
Create your password when setting up your account.
For adding new generator, get from genset controller
nameplate or controller. See Section 1.9.
For adding new generator, get from genset controller.
See Section 1.9.
From OnCue decal, provided with OnCue Plus kit. See
Section 2.6.
Create a name that identifies the generator set.
Enter address or other location information for the
generator set.

Section 2 OnCue Plus Operation

2.2 Information Required

You will need to enter some information when you create
your OnCue Plus account and connect to your
generator set. Create a user name, account password,
and display name for your generator set, and provide
the generator location. Obtain other information from
the generator set and the OnCue Plus kit. Required
information is listed in Figure 2-1.
Can Change in Settings View?
NO
NO
NO
YES
NO
YES
YES
Section 2 OnCue Plus Operation 19