Kohler OnCue Plus RDC Operation page 38

2. Using the command prompt window: Try to telnet to
the OnCue Plus server by using the entering the
following:
c:\> telnet devices.kohler.com 5253
3. If the connection was successfully established, you
will see the symbols shown in Figure 3-4.
Microsoftr and Windowsr are registered trademarks of Microsoft
Corporation.
1
1. Click to turn on Telnet Client
Figure 3-2 Telnet Activation, Microsoftr Windowsr 7
Figure 3-4 Telnet Command to Confirm OnCuer Plus Server Connection
38 Section 3 Troubleshooting
1
1. Click Start icon, then All Programs
2. Click Accessories
3. Click Command Prompt to open a command window
Figure 3-3 Opening a Command Prompt Window
2
3
tt1405
TP-6928 1/14