Rdc2 With Apm - Kohler OnCue Plus RDC Operation

1.7.2

RDC2 with APM

The PowerSyncr Automatic Paralleling Module (APM)
includes two OnCuer Plus activation codes, one for
each paralleled generator set. Each generator set must
Kohlerr System
RDC2
Generator Set Controller
RDC2
Generator Set Controller
RBUS connections [
APM
LCM or
Load
ATS
Shed
Kit ]
* Customer-provided
[ See module installation instructions for RBUS connection information.
] The load shed kit, if equipped, is installed inside the ATS enclosure.
Figure 1-4 Two 14RESA or 20RESA Single-Phase Generator Sets with the PowerSyncr Automatic Paralleling
Module (APM)
12 Section 1 System Information and Installation
Ethernet cables *
PIM
be connected to the router or modem.
customer-provided hub may be used to connect the two
generator sets to the router or modem, if necessary.
See Figure 1-4. Also see Section 1.7.1.
Cable or
Router *
DSL
Modem *
UPS *
(optional)
Tablet *
OnCue Plus
PC/
Server on the
laptop *
Internet
Multiple PCs can
be connected.
Smart phone*
TP--6796
TP-6928 1/14
A