Introduction - Kohler OnCue Plus RDC Operation

This manual provides operation instructions for the
OnCuer Plus Generator Management System. OnCue
Plus is a web application that does not require the
installation of software on your computer. OnCue Plus
allows remote monitoring and control of your generator
set using a computer, tablet, or smart phone from any
location that provides web access.
OnCue Plus applies to Kohlerr Residential and Light
Commercial generator sets equipped with the following
controllers:
RDC/DC
D
RDC2/DC2
D
VSC
D
Note: The RDC2, DC2, and VSC controllers require an
activation code, which is supplied with the OnCue
Plus kit.
Note: The RDC and DC controllers must be equipped
with the Ethernet option board kit GM62465-KP1.
See TT-1566, provided with the kit, for installation
instructions.
TP-6928 1/14
Information in this publication represents data available
at the time of print. Kohler Co. reserves the right to
change this publication and the products represented
without notice and without any obligation or liability
whatsoever.
Read this manual and carefully follow all procedures
and safety precautions to ensure proper equipment
operation and to avoid bodily injury. Read and follow the
Safety Precautions and Instructions section at the
beginning of this manual. Keep this manual with the
equipment for future reference.
List of Related Literature
Figure 1 lists related literature.
Literature Type
OnCue Plus Specification Sheet
Ethernet Option Board Installation
Instructions (RDC/DC only)
Figure 1 Related Literature

Introduction

Part Number
G6-140
TT-1566
Introduction 7