Adjustable Handlebar (If Equipped); Track - BRP Lynx 600R E-TEC 2018 Original Operator's Manual

NOTE: Refer to decal on vehicle for
towing weight capacities.
WARNING
Never tow an accessory with a
rope. Always use a rigid tow bar.
Using a rope would result in a col-
lision between the object and the
snowmobile and possibly in a tip
over in case of a rapid deceleration
or on a downward slope.
J-Type Hitch
Attaching an Equipment
mmo2011-007-012_a
1. Hairpin clip
2. Safety tab
1. Remove the hairpin clip.
2. Align accessory attachment hole
with the hitch hook.
3. Push the accessory attachment
passed the safety tab.
4. Secure safety tab using the hairpin
clip.
Detaching an Equipment
1. Remove the hairpin clip.
2. Push safety tab forward to free ac-
cessory attachment from the hitch.
3. Detach accessory attachment.
4. Install hairpin clip.
CONTROLS, INSTRUMENTS AND EQUIPMENT
22) Adjustable Handlebar
(If equipped)
The handlebar height is adjustable. To
adjust, proceed as follows:
1. Pull up the lock lever.
fmo2015-003-006_a
1. Lock lever
2. Bring the handlebar to the desired
position and push down the lock
lever to lock it.
NOTE: On the other models, the steer-
ing can be set to a desired fixed posi-
tion, see your Lynx authorized dealer.

23) Track

Never stud a track that has not
been approved for studs.
stalling studs on an unapproved
track could increase the risk of the
track tearing or severing, possibly
resulting in serious injury or death.
Before proceeding with the installation
of special studs on tracks you must
contact your authorized LYNX snow-
mobile dealer for current specific stud-
ding availability and applications.
BRP does not recommend to ride a
snowmobile equipped with high lug
profile track at high speed in a trail, on
hard packed surfaces or ice for an ex-
tended period of time.
In the event that you have to, reduce
your speed, then minimize the dis-
tance you ride on those surfaces.
_______________
WARNING
In-
61