Mountain Strap (If Equipped) - BRP Lynx 600R E-TEC 2018 Original Operator's Manual

CONTROLS, INSTRUMENTS AND EQUIPMENT
mmo2009-004-019
LOW
mmo2009-004-020
HIGH
mmo2009-004-021
UP
To set the handholds to the desired po-
sition, proceed as follows:
1. Pull up the knob and unscrew sev-
eral turns until the handhold is free
to move.
______________
58
mmo2009-004-022_a
Step 1: Pull up
Step 2: Unscrew
2. Refer to the decal located on the
RH backrest bracket and guide the
handhold to the desired position.
NOTE: The decal can also be seen in
IMPORTANT ON-PRODUCT LABELS
3. Screw the knob enough to obtain a
suitable tension.
4. Lower knob to lock the handhold in
place.
Commander 600 E-TEC Limited
and 69 Ranger Army LTD
Fixed handholds on each side of the
passenger seat.
fmo2012-003-020_a
TYPICAL
1. Passenger handhold
16) Mountain Strap (If
equipped)
Mountain strap provides a grip for the
driver when side-hilling.
.