How To Read Fault Codes - BRP Lynx 600R E-TEC 2018 Original Operator's Manual

MONITORING SYSTEM

How to Read Fault Codes

Multifunction Analog/Digital
Display Only
To read any active fault code, press
and hold MODE (M) Button and simul-
taneously depress the HI/LOW beam
switch repeatedly several times.
If two or more codes are registered,
use SET (S) or MODE (M) to scroll.
To exit the fault codes mode, press and
hold MODE (M) Button.
Contact an authorized Lynx dealer for
code signification.
______________
144