BRP Lynx 600R E-TEC 2018 Original Operator's Manual page 142

TROUBLESHOOTING GUIDELINES
HEATED GRIPS/THUMB WARMERS ARE NOT WORKING
1. Engine RPM is too low.
– Make sure engine RPM is above 2000.
ENGINE HAS SHUT DOWN
1. The engine shuts down after long periods of idling.
– Do not let engine idle too long. Refer to VEHICLE WARM-UP in OPERATING
INSTRUCTION.
NO RESPONSE FROM THE THROTTLE LEVER INPUTS. MESSAGE DISPLAYED:
PRESS START TO GO
1. Engine management system has detected a sensor problem.
– Press and hold the Start button in order to move vehicle. Seek service from
an authorized Lynx dealer, repair shop, or person of your own choosing for
maintenance, repair, or replacement.
______________
140