Planet DSP-1000 User Manual page 95

5 erasehdd
6 eraseusb1
7 eraseusb2
8 delfiles
9 getfiles
10 restoreconfig
11 saveconfig
12 osd_on
13 osd_off
14 scrolling_on
15 scrolling_off
16 refreshcontent
17 fwupdate
These commands can be sent to the DSP-1000 via network connection
(TFTP) by using the command console or the PC utility (Configuration
Tool).
For more details to TFTP and the Configuration Tool, please
NOTE:
refer to the Appendix.
upload.lst file.
This command will erase all files stored on the local
drive or CF card.
This command will erase all files stored on the
attached USB drive on port 1.
This command will erase all files stored on the
attached USB drive on port 2.
This command will erase all files listed in the
delete.lst file.
This command will create a file index of the current
files on the local HDD.
This command will upload the new settings from the
config.conf file.
This command will save the current settings to a
config.conf file.
This command will turn the on-screen messages ON.
This command will turn the on-screen messages
OFF.
This command will turn the scrolling text message
ON.
This command will turn the scrolling text message
OFF.
This command will refresh the playlist and file
content.
This command will upgrade the firmware using the
latest version on the drive.
- 95 -