Table of Contents
Advertisement
7. In the NETWORK category, you have two locations (PC1 & PC2)
where you can add the shared folders. Press Enter to setup the
file path.
8. Enter the IP address of your computer plus the directory and
save it. As seen in step 4, the name for the shared folder in this
example is 123, so the input for the directory path here would
therefore be 123.
9. In order for these changes to take effect, exit the Setup menu and
reboot the device immediately.
10. After rebooting, you can access the remote folder through your local
network. Go to the file library and access the files in PC1 or PC2.
- 75 -
Advertisement
Table of Contents
