the DSP-1000's setup menu.
5. In the NETWORK category, you have two locations (PC1 & PC2)
where you can add the path to your LAN disk.
6. Choose a link (PC1 or PC2) and press ENTER.
7. Enter the IP address of your LAN disk plus the directory and
save it. As seen in step 1, the SMB folder in this example is 123,
so the input for the directory path here would be 123.
NOTE:
Passwords are not supported.
8. In order for those changes to take effect, exit the setup menu and
reboot the device immediately.
- 77 -