directory.
4. For the playlist mode on the DSP-1000, select Time.
5. Whenever the time is up, the DSP-1000 will automatically
refresh the content and if there is a specific playlist found for that
time, it will rename the file to play.lst and use it for playback
during the defined period.
6. If there is a gap in between some of the time based playlists, it
will automatically use the title.lst playlist. If that does not exist, it
will pause at the library screen.
To use the playlist by time function, make sure the DSP-1000
NOTE:
has access to a NTP server to synchronise the time. Do not let
the playlists overlap themselves in time!
09:00
_0000_0900.lst
If there is no playlist for a certain time and there is a gap until the next
playlist starts, the DSP-1000 will automatically use the title.lst playlist
12:00
_0900_1200.lst
15:00
title.lst
_1500_1800.lst
- 86 -
18:00
title.lst