Table of Contents
Advertisement
4.7 Scrolling Text
The DSP-1000 can display on-screen messages in the form of a scrolling
text (ticker) at the bottom of the screen. DSP-1000 can store a text file
"message.txt" on the local drive and start playback. Or use the
configuration tool instead to create a bitmap message and send it to the
DSP-1000 before starting playback..
1. Create a new text file and name it "message.txt".
2. Write your message on a single line with a maximum of 512
English letters.
3. Upload the file to the local drive on the DSP-1000.
4. Go to the Misc3 category in the setup menu and turn on the
scrolling text.
5. Play any video clip or other media file and the scrolling text will
be displayed.
The scrolling text message is not available during playback of
NOTE:
ISO files. For the DSP-1000, use the configuration tool to
create the bitmap message instead of message.txt.
To update the text message during playback, you can use the
Configuration Tool on the PC and send the message via local network.
- 93 -
Advertisement
Table of Contents
