Appendix A: Configuration Tool; Configuration - Planet DSP-1000 User Manual

Appendix A: Configuration Tool

This tool was designed for quick and easy configuration of the settings of
the DSP-1000, as well as to send remote commands with a push of a
button. Currently, this tool is only available for the Windows platform, so if
you are using a different Operating System, please refer to the TFTP
section or use the remote control instead. Make sure that when you
upgrade the firmware, you also download the latest version of this
configuration tool.
A.1 Configuration
Start the configuration tool and select the Configuration tab. You can now
create a new configuration file by adjusting the settings and filling out the
empty fields or open an existing config.conf file and modify it.
Once you have made your modifications, save the configuration file to
your local drive. For organisational purposes, you can use any file name
you like but when you want to upload it to your DSP-1000, the file name
has to be config.conf.
When using the backup and restore buttons in the configuration menu,
only one device at a time can be controlled. To control more than one at a
time, save the config file on your computer, then go to the Remote
Command tab and use the Restore Config command.
- 100 -