Table of Contents
Advertisement
4.3.1
USB Drive
To access the USB drive, simply connect it to one of the USB ports on
DSP-1000.
1. Turn on the device, then boot up the DSP-1000.
2. In the file library, you can now access the drive under USB1 or
USB2, depending on which port is used.
3. File systems supported are FAT16 and FAT32.
Self powered USB drives are recommended. If more than one
NOTE:
bus powered USB drive is connected, there might not be
sufficient power to run the second drive.
4.3.2
USB Auto-Copy
The USB auto-copy function is designed to be used with an internal drive,
to quickly and easily update the content if there is no network connection
for the DSP-1000. At boot up, it will automatically copy all files from the
external USB drive and store them on the internal drive or CF card.
- 79 -
Advertisement
Table of Contents
