Table of Contents
Advertisement
example is 123, so the input for the directory path here would
therefore be 123.
Passwords are not supported, so to access the PC, a guest
NOTE:
account has to be enabled.
7. In order for these changes to take effect, exit the setup menu and
reboot the device immediately.
8. After rebooting, you can access the remote folder through your
local network. Go to the file library and access the files in PC1 or
PC2.
4.2.2
Shared Folder on Windows Vista
To access a shared folder on a local PC, you will need a computer which
is connected to the same local network as your DSP-1000. To use this
function on Windows Vista, file sharing has to be turned on, password
protected sharing turned off and a guest account with at least contributor
level has to be added.
1. Go to the Control Panel, then to the Network and Sharing
Center. Make sure file sharing is turned on and password
protected sharing is turned off.
- 72 -
Advertisement
Table of Contents
