Table of Contents
Advertisement
When you create the playlist, add one more empty line at the end
Ans:
of the playlist before you save the file.
I've enabled the Manual/Standby Play Mode and now it shows
Q8
"NO TITLE FILES"?
This message will appear if there is no 000.avi or 000.jpg &
000.mp3 file on the local drive. It will also appear if a numeric
Ans:
button is pressed but there is no such a file. Make sure to rename
your files properly and store them on the local drive, then try again.
The remote commands of the Configuration Tool don't work
Q9
on Windows Vista.
The TFTP Client on Windows Vista is disabled by default but the
Configuration Tool needs this application to send the remote
Ans:
commands. Go to the Control Panel and turn on the TFTP client,
then try again.
Q10
I can not set the time manually, why doesn't it work?
The time can only be set manually when the NTP server is turned
Ans:
OFF.
Q11
What's the format for the URL in the download path?
For the URL, use the IP address and enter the path to the folder
where the update.dsp list is located. This can be either an HTTP or
a FTP address. When the string [MAC] is added, it will be replaced
with the wired MAC address (one word, lower case) of the
Ans:
DSP-1000
For password protected FTP accounts, use
ftp://login:pass@IP/folder/..
What's
Q12
downfromserver?
The downfromserver command will start the download function and
the DSP-1000 will get the update.dsp file via the download path
Ans:
that has been set in the setup menu. This will only work when the
path has been set and the mode is either OFF or set to Schedule.
the
difference
- 117 -
between
downnow
and
Advertisement
Table of Contents
