Table of Contents
Advertisement
automatically plays all files stored in the root directory of the internal drive
or any attached USB drive as soon as the unit is turned on and plays
them continuously. The playback sequence will be according to the file
name and in following order from HDD to USB1 and USB2.
Reboot the device after you have enabled this function. To turn it OFF,
press STOP on your remote control to pause the playback, then press
SETUP to enter the setup menu, go back to Misc2 and change it to
STANDARD.
Enabling the playlist function (Misc1) will automatically reset
NOTE:
the play mode to STANDARD.
4.6.3
Manual & standby
Playback mode with quick access to certain files via numeric buttons on
the remote control from 000-999. This mode can be used for kiosks and
other digital signage applications, where users may request certain
information with the push of a button. Reboot the device after you have
enabled this function.
When this mode is used, the player will require a title file (000.avi or
000.jpg & 000.mp3) and up to 999 AVI files, which are played when the
numeric buttons are pressed. In Manual mode, once the AVI file has
finished playback, it will return to the title file until another button is
pressed. In Standby mode, it will wait for further user input. Those files
can either be stored on the local hard drive or the CF card.
Button
000 (title file)
001-999
File
000.avi or 000.jpg &
000.mp3
001.avi ~ 999.avi
- 91 -
Advertisement
Table of Contents
