Table of Contents
Advertisement
3. To enter the setup menu, press the SETUP button on your
remote control.
The DSP-1000 requires the following ports on the firewall to
NOTE:
be opened in order to access the internet and the required
services: 21 (FTP), 69 (TFTP), 80 (HTTP), 445 (SMB).
3.1 Network Category
In this category, you can configure how the DSP-1000 is connected to the
local network and set up the links to a local computer or network disk for
PC1/2. Use the arrow keys on your remote control for navigation and the
ENTER button to configure the settings. You will need to reboot your
device after changing any of the settings.
- 22 -
Advertisement
Table of Contents
