Table of Contents
Advertisement
8. If the down.lst path in the update.dsp file was set to 1, it will start
downloading the new files according to the download list.
9. Once the download has finished, the unit will automatically
refresh its content and playlist if necessary. Depending on the
play mode, it will stop at the library screen or continue playback.
If the DSP-1000 fails to download a file, it will skip and jump to
the next one on the list. If it's stuck in the middle of
NOTE:
downloading a file and stays at the same percentage for more
than 5 minutes due to network or connection problems, it will
reboot automatically.
4.1.3
Creating the update.dsp List
The first file that the DSP-1000 will access is the update.dsp list.
According to those settings, it will execute further commands and
download new files.
1. Create a new text file and call it "update.dsp".
2. Add the following lines, followed by one empty line (use 1 to
enable the download or command and 0 to disable it or simply
leave out the ones you don't need):
delete.lst 0
message.txt 1
- 58 -
Advertisement
Table of Contents
