Replacing A Fuse; Cleaning A Smoke Detector; Filling In The Maintenance Documents; Checks After Maintenance - Halton Safe Management 2.0 Installation, Commissioning, Operating, And Maintenance Manual

Halton Safe Management 2.0 (SM2) - Installation, commissioning, operating, and maintenance guide

7.3.10 Replacing a fuse

1. Disconnect the power cable of the Halton Safe Management 2.0 controller from the socket.
2. Replace the broken fuse.
▪ Halton Safe HSL, fuse type: SMD 2410 5 A F
▪ Halton Safe HSP, fuse type: 2 A glass tube fuse, 5 x 20 mm
3. Connect the power cable of the Halton Safe Management 2.0 controller to the socket.

7.3.11 Cleaning a smoke detector

For instructions, see the Calectro website.

7.3.12 Filling in the maintenance documents

Fill in the maintenance documents required by your organisation.

7.4 Checks after maintenance

Make sure you have filled in the maintenance documents.
1.0 All rights reserved ©Halton
61