Configuring An Alarm Group (Zone) - Halton Safe Management 2.0 Installation, Commissioning, Operating, And Maintenance Manual

Halton Safe Management 2.0 (SM2) - Installation, commissioning, operating, and maintenance guide
Value
-
Fan stop
7. To configure other fans, select one of the fan icons at the bottom of the view.

5.3.8 Configuring an alarm group (zone)

1. Log in as Installer. For instructions, see
2. Select the zone settings icon.
The Zone settings view opens.
3. Set the type of an alarm group (zone).
a. On the row of the zone, select the "Type" column.
b. In the selection window, select a value, then select "Change".
1.0
Description
No impact
The fan is stopped
Logging in as
All rights reserved ©Halton
Installer.
28