Testing The System - Halton Safe Management 2.0 Installation, Commissioning, Operating, And Maintenance Manual

Halton Safe Management 2.0 (SM2) - Installation, commissioning, operating, and maintenance guide
3. Wait for a couple of minutes while the system opens the fire dampers.
Once the fire dampers are open, the system continues working normally.

7.3.4 Testing the system

Here you verify that the system is working as it should. You can test the whole system or an alarm group (zone).
1. Log in as Installer. For instructions, see
2. Select the zone settings icon.
3. To test the whole system manually, in the Zone settings view, at the lower part of the view, select "Test all".
1.0
Logging in as Installer.
All rights reserved ©Halton
53