Configuring A Fire Damper - Halton Safe Management 2.0 Installation, Commissioning, Operating, And Maintenance Manual

Halton Safe Management 2.0 (SM2) - Installation, commissioning, operating, and maintenance guide

5.3.5 Configuring a fire damper

Here you connect a fire damper to an alarm group (zone). You can also change the location (name) of the fire
damper to make it easier to locate it.
1. Log in as Installer. For instructions, see
2. Select the damper icon.
Note: The icon is grey if no units have been configured.
3. In the Dampers view, configure the zone information for each fire damper.
a. On the row of the fire damper you want to configure, select the "Zone" column.
b. In the selection window, select a zone, then select "Change".
1.0
Logging in as Installer.
All rights reserved ©Halton
23