Halton Safe Management 2.0 (SM2) - Installation, commissioning, operating, and maintenance guide
5.3.3 Logging in as Installer
For information on the user levels, see
1. On the homepage, select the lock icon at the top of the view. A keypad opens.
2. On the keypad, type in password 01473, then select "Accept".
5.3.4 Configuring a Halton Safe HSL link unit
Here you link a Halton Safe HSL link unit to the Halton Safe Management 2.0 controller.
1. Log in as Installer. For instructions, see
2. Select the link unit icon.
Note: The icon is grey if no units have been configured.
3. In the Links view, set the type of each link unit. For more detailed instructions, see
Value
-
Link
If you get errors when doing the task, see Troubleshooting.
1.0
User
levels.
Logging in as
Installer.
Description
Not linked to the controller
Linked to the controller
All rights reserved ©Halton
Setting the type of a
unit.
22