Renaming A Unit - Halton Safe Management 2.0 Installation, Commissioning, Operating, And Maintenance Manual

Halton Safe Management 2.0 (SM2) - Installation, commissioning, operating, and maintenance guide

5.3.10 Renaming a unit

Here you change the location (name) of a unit, for example, to make it easier to locate it.
1. Log in as Installer. For instructions, see
2. Select the icon of the unit you want to rename. For example, the fire damper icon:
The view that lists the units opens, for example, the Dampers view.
3. In the view that lists the units, on the row of the unit you want to configure, select the "Location" column.
4. Select "Programming".
5. In field "Text", type in the name of the unit. For example, "FireDamper1" or "SD1".
6. On the left-hand side of the view, select "Change". After a while, the system updates the name.
7. To exit the Programming mode, in the upper left corner of the view, select "Usermode" from the drop-down
1.0
Logging in as Installer.
All rights reserved ©Halton
32