Configuring External Controls - Halton Safe Management 2.0 Installation, Commissioning, Operating, And Maintenance Manual

Halton Safe Management 2.0 (SM2) - Installation, commissioning, operating, and maintenance guide
Value
-
Close zone
5. Set up a test schedule for an alarm group (zone). For instructions, see

5.3.9 Configuring external controls

You can use external controls to open or close an alarm group (zone), for example.
1. Log in as Installer. For instructions, see
2. Select the external zone control icon.
The External zone control view opens. The "Connection" column shows the connections of the Halton Safe
Management 2.0 controller for each external control. The external fire alarm shown at the lower part of the
view is a general fire alarm that impacts all zones.
3. Configure the zone information for an external control. For instructions, see
group (zone).
1.0
Description
No impact
The dampers in the alarm group (zone) are
closed when there is an external fire alarm.
Logging in as Installer.
All rights reserved ©Halton
Setting up the test schedule.
Connecting a unit to an alarm
30