Setting The Type Of A Unit; Connecting A Unit To An Alarm Group (Zone) - Halton Safe Management 2.0 Installation, Commissioning, Operating, And Maintenance Manual

Halton Safe Management 2.0 (SM2) - Installation, commissioning, operating, and maintenance guide
list.
If you get errors when doing the task, see Troubleshooting.

5.3.11 Setting the type of a unit

Here you set the type of a unit, for example, a Halton Safe HSL link unit.
1. Log in as Installer. For instructions, see
2. Select the icon of the unit you want to configure. For example, the link unit icon:
3. In the view that lists the units, on the row of the unit you want to configure, select the "Type" column.
4. In the selection window, select the type, then select "Change".

5.3.12 Connecting a unit to an alarm group (zone)

Here you configure the zone information of a fire damper or smoke detector, for example.
1. Log in as Installer. For instructions, see
2. Select the icon of the unit you want to configure. For example, the smoke detector icon:
1.0
Logging in as Installer.
Logging in as Installer.
All rights reserved ©Halton
33