Analog Devices ADSP-21364 EZ-KIT Lite Manual page 3

Regulatory Compliance
The ADSP-21364 EZ-KIT Lite evaluation system is designed to be used
solely in a laboratory environment. The board is not intended for use as a
consumer end product or as a portion of a consumer end product. The
board is an open system design which does not include a shielded enclo-
sure and therefore may cause interference to other electrical devices in
close proximity. This board should not be used in or near any medical
equipment or RF devices.
The ADSP-21364 EZ-KIT Lite evaluation system has been certified to
comply with the essential requirements of the European EMC directive
89/336/EEC (inclusive 93/68/EEC) and, therefore, carries the "CE"
mark.
The ADSP-21364 EZ-KIT Lite has been appended to Analog Devices,
Inc. EMC Technical File (EMC TF) referenced DSPTOOLS1, issue 2
dated September 15, 2004 and was declared CE compliant by an
appointed Notified Body (No.0673) as listed below.
Notified Body Statement of Compliance: Z600ANA1.020
The EZ-KIT Lite evaluation system contains ESD (electrostatic discharge)
sensitive devices. Electrostatic charges readily accumulate on the human
body and equipment and can discharge without detection. Permanent dam-
age may occur on devices subjected to high-energy discharges. Proper ESD
precautions are recommended to avoid performance degradation or loss of
functionality. Store unused EZ-KIT Lite boards in the protective shipping
package.
Issued by: Technology International (Europe) Limited
60 Shrivenham Hundred Business Park
Shrivenham, Swindon, SN6 8TY, UK