Fuse Replacement; Troubleshooting - ADJ EVENT BAR PRO User Manual

Locate and disconnect the unit's power cord, then find the fuse holder located inside the power
socket. Remove the fuse holder by using a flat-head screwdriver to gently pry the fuse holder from
its socket. Remove and discard the bad fuse from the fuse holder, and replace with a new fuse of the
same rating. Please note that the fuse holder includes a second slot for holding a spare fuse, and
take care to remove and discard the correct fuse.
Fixture Cleaning: Due to fog residue, smoke, and dust, the internal and external optical lenses and
mirror should be cleaned periodically to optimize light output. Cleaning frequency depends on the
environment in which the fixture operates (I.e. smoke, fog residue, dust, dew). In heavy club use, it
is recommended to clean these on a monthly basis. Periodic cleaning will ensure longevity and crisp
output.
• Use normal glass cleaner and a soft cloth to wipe down the outside casing.
• Use a brush to wipe down the cooling vents and fan grill.
• Clean the external optics and mirror with glass cleaner and a soft cloth every 20 days.
• Clean the internal optics with glass cleaner and a soft cloth every 30-60 days.
• Always be sure to dry all parts completely before plugging the unit back in.
Trouble Shooting: Below is a common problem that you may encounter, with possible solutions.
No light output from the unit:
• Be sure the external fuse has not blown. The fuse is located on the rear panel of the unit.
• Be sure the fuse holder is completely and properly seated.

FUSE REPLACEMENT

CLEANING
TROUBLE SHOOTING
22