Table of Contents
Advertisement
M U L T I U N I T P O W E R L I N K I N G
This features allows you to connect the fixtures to one another using the power cable input and output
sockets.
The maximum number of units that can be linked in this manner is as follows:
• 29 units when running on 120V power.
• 49 units when running on 230V power.
DO NOT EXCEED THIS MAXIMUM NUMBER WHEN POWER LINKING UNITS!
All linked units must be of the same make and model type. Do not mix and match units!
F U S E R E P L A C E M E N T
Disconnect the unit from its power source. Locate the fuse holder, which is beside the power port on
the top of the unit, as shown in the diagram below. Use the flat head screwdriver to gently remove the
fuse holder, then remove the used fuse and install a fresh fuse in its place. Always use a fuse of the
same T1A / 250V rating for replacement.
Fuse
T1A / 250V
29
Advertisement
Table of Contents
