General Information - ADJ EVENT BAR PRO User Manual

Unpacking: Thank you for purchasing the Event Bar Pro by ADJ Products, LLC. Every Event Bar Pro
has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the
shipping carton for damage that may have occurred during shipping. If the carton appears to have
been damaged, carefully inspect your fixture for any damage and be sure all equipment necessary to
operate the unit has arrived intact. In the event damage has been found or parts are missing, please
contact our toll free customer support number for further instructions. Please do not return this unit
to your dealer without contacting customer support first.
Introduction: The Event Bar Pro is DMX intelligent 4-head moving pinspot LED fixture. The Event
Bar Pro has 3 DMX Modes: 1 Channel DMX Mode, 12 Channel Mode, and 14 Channel Mode. The
fixture has three operating modes: sound active mode, show mode, or DMX controlled. The Event
Bar Pro can only be run as a stand alone unit or in primary-secondary configuration. This unit is suit-
able for theaters, studios, retail stores, and other similar locations. For best results, use fog or spe-
cial effects smoke to enhance the light projections.
Customer Support: ADJ Products, LLC provides a toll free customer support line, to provide help
and to answer any questions that may arise during set up or initial operation. You may also visit us
on the web at www.adj.com for any comments or suggestions. Service Hours are Monday through
Friday 8:00 a.m. to 4:30 p.m. Pacific Standard Time.
Voice: (323) 582-3322
Fax: (323) 832-9142
E-mail: support@adj.com
Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or
moisture.
Warning! This unit may cause severe eye damage. Avoid looking directly into the light source at all
times!

GENERAL INFORMATION

3