P O W E R C O R D D A I S Y C H A I N
This feature allows the fixtures to be linked together using the IEC input and output sockets.
The maximum number of units that can be connected in this manner is 7 units.
Once this number has been reached, a new power outlet will be needed in order to accommodate ad-
ditional units.
All linked fixtures must be of the same make and model type. Do NOT mix fixtures types!
C L E A N I N G
Due to fog residue, smoke, and dust, cleaning of the internal and external optical lenses must be car-
ried out periodically to optimize light output.
•
Use normal glass cleaner and a soft cloth to wipe down the outside casing.
•
Clean the external optics with glass cleaner and a soft cloth every 20 days.
•
Always be sure to dry all parts completely before plugging the unit back in.
Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke, fog resi-
due, dust, dew).
F U S E R E P L A C E M E N T
Locate the fuse holder at the rear of unit next to the power cord, then use a phillips head screwdriver
to remove the fuse holder. Remove the used fuse and replace with a new fuse of the same rating.
Insert the fuse holder and fuse into the unit and secure the fuse holder back in place.
23