Table of Contents
Advertisement
Kerotest Manufacturing – SHANNON & PAF III OPERATORS MANUAL - REV 3
When the device is first started, it may take up to 2 minutes to acquire 5 satellites. During the
acquisition process the display will look something like this:
If after a few minutes, the SMART Scanner™ still has not acquired 5 satellites, you may try to follow some
of the suggestions in the GPS section on page 47, or you can bypass the GPS data by simply connecting
the fitting. The SMART Scanner™ will show you a message similar to the following:
IF YOU CHOOSE TO PRESS THE BUTTON, YOU WILL BE ABLE TO SCAN THE BARCODE AND COMPLETE THE
FUSION NORMALLY; HOWEVER, GPS DATA WILL NOT BE STORED WITH THE FUSION.
CONNECT FITTING
GPS Searching . . .
WAIT FOR GPS SIGNAL
PRESS TO IGNORE
Page 38 of 60
3
Advertisement
Table of Contents
