Table of Contents
Advertisement
Safety and regulatory compliance
Pump Module User Guide
Compliance standards
The Pump Module complies with the applicable EU Directives and bears the
CE mark. See the Declaration of Conformity or Declaration of Incorporation, as
applicable, for details. The Pump Module is designed to comply with the
regulations and standards listed in the following table.
Regulatory Compliance
EMC
European Union
Canada
Australia/New Zealand
Safety
European Union
Canada
USA
Electromagnetic compatibility
If the Pump Module causes interference with radio or television reception,
which can be determined by turning the device off and on, try one or more of
the following measures:
•
Relocate the radio or television antenna.
•
Move the device away from the radio or television.
•
Plug the device into a different electrical outlet, so that the device and the
radio or television are on separate electrical circuits.
•
Make sure that all peripheral devices are also certified.
•
Make sure that appropriate cables are used to connect the device to
peripheral equipment.
•
Consult your equipment dealer, Agilent Technologies, or an experienced
technician for assistance.
Changes or modifications not expressly approved by Agilent Technologies could
void the user's authority to operate the equipment.
Sound emission declaration
Sound pressure: Lp < 70 dB according to EN ISO 779:2010.
Schalldruckpegel: Lp < 70 dB nach EN ISO 779:2010.
Standard
EMC Directive 2004/108/EC
IEC 61326- 1:2005 / EN 61326- 1:2006
ICES/NMB- 001:2004
AS/NZS CISPR 11:2004
Machinery Directive 2006/42/EC
Low Voltage Directive 2006/95/EC
IEC 61010- 1:2001 / EN61010- 1:2001
IEC 61010- 2- 081:2001+A1:2003 /
EN 61010- 2- 081:2002+A1:2003
CAN/CSA- C22.2 No. 61010- 1- 04
CAN/CSA- C22.2 No. 61010- 2- 081- 04
ANSI/UL 61010- 1:2004
Pump Module User Guide
General safety information
5
Advertisement
Table of Contents
