Agilent Technologies Pump Module Original User Manual page 6

Pump Module User Guide
General safety information
4
Symbol Description
Indicates hot surface hazard.
Indicates that to prevent serious injury, guards,
interlocks, and safety devices should be restored to
correct operation when installing parts or making
repairs. Refer to user or service documentation for
additional information.
Indicates protective conductor terminal, which is bonded
to conductive parts of an equipment for protection
against electric shock in case of a fault and is intended
to be connected to an external protective earthing
system.
Indicates frame or chassis terminal, which is bonded to
conductive parts of an equipment for safety purposes.
Indicates that you must not discard this electrical/
electronic product in domestic household waste.
WARNING
Pinch hazard! Do not allow fingers to contact moving parts.
WARNING
Ensure that the Pump Module is turned off before lifting the flip-top cover on
a pump head. Keep the covers closed while the pumps are running.
WARNING
Do not remove the exterior Pump Module covers or otherwise disassemble
the device. Doing so can expose you to hazardous-voltage electronics and damage the
Pump Module.
WARNING
Ensure that protective clothing and eye protection are worn if hazardous
products are being pumped.
WARNING
Ensure that liquid does not contact the device electronics. Periodically
inspect the tubing for leaks.
CAUTION
Do not lift the Pump Module by the peristaltic pumps that are mounted on the
front of the device. Doing so could damage the Pump Module.
Pump Module User Guide