Pump Module Overview And Components - Agilent Technologies Pump Module Original User Manual

Pump Module User Guide

Pump Module overview and components

Pump Module overview and components
Overview
Components
8
The Pump Module contains two peristaltic pumps, one that pumps the fresh
source fluid into a reservoir, and a second one that pumps the waste fluid
from the reservoir. Optionally, you can use the Pump Module with an Agilent
Weigh Station, Weigh Shelf, or Weigh Pad to provide precise liquid- level control
for an autofilling reservoir or wash station.
The following figure shows the primary components and the table provides
descriptions of each component.
Figure Pump Module front view (left) and rear view (right)
Item Feature Description
1 Power Turns on or turns off the power.
switch
2
Peristaltic Pumps fluid in either a forward or reverse direction, as
pump specified in the automation control software. Each pump
has a flip- top cover that enables you to route the tubing.
3 AC power Connects the power cable.
connector
4
SHELF A Connects the communication cable from a Weigh Shelf,
port Weigh Station, or Weigh Pad to the Pump Module.
1
2
100V-240V
50/60Hz
1.5 Amps
3
4
5
6
7
8
Pump Module User Guide