7.Detailed Descriptions
Image Fusing
Overview
No.
1
Pressure roller
2
Pressure roller thermistor (center/ end)
(TH3/TH4)
3
Fusing entrance sensor (S2)
4
Fusing lamp (H1)
5
Fusing sleeve belt
Mechanism
Fusing Mechanism
In order to improve energy conservation, the QSU (Quick Start Up) method has been adopted over the
hot roller device of the previous machine to reach the fusing temperature much quicker. As a result, the
warm-up time has been reduced to less than half that of the previous machine.
276
Part name
No.
6
Fusing thermostat (TH1)
7
Fusing thermopile (TH2) *At main
machine side
8
Fusing NC sensor (S1)
9
Separation plate
Part name