Ricoh P C300W Field Service Manual page 6

Handling Toner
•
Work carefully when removing paper jams or replacing toner bottles or cartridges to avoid spilling
toner on clothing or the hands.
•
If toner is inhaled, immediately gargle with large amounts of cold water and move to a well-
ventilated location. If there are signs of irritation or other problems, seek medical attention.
•
If toner gets on the skin, wash immediately with soap and cold running water.
•
If toner gets into the eyes, flush the eyes with cold running water or eye wash. If there are signs of
irritation or other problems, seek medical attention.
•
If toner is swallowed, drink a large amount of cold water to dilute the ingested toner. If there are
signs of any problem, seek medical attention.
•
If toner spills on clothing, wash the affected area immediately with soap and cold water. Never use
hot water! Hot water can cause toner to set and permanently stain fabric.
•
Always store toner and developer supplies such as toner and developer packages, cartridges,
bottles (including used toner and empty bottles and cartridges), and AIO unit out of the reach of
children.
•
Always store fresh toner supplies or empty bottles or cartridges in a cool, dry location that is not
exposed to direct sunlight.
•
Do not use a vacuum cleaner to remove spilled toner (including used toner). Vacuumed toner may
cause a fire or explosion due to sparks or electrical contact inside the cleaner. However, it is
possible to use a cleaner designed to be dust explosion-proof. If toner is spilled over the floor,
sweep up spilled toner slowly and clean up any remaining toner with a wet cloth.
Handling the development unit cooling system
For the machines installed the development cooling system:
The development unit cooling system circulates propylene glycol from a sealed tank through hoses
1.
that pass behind cooling plates on the sides of each development unit.
The coolant tank is located at the bottom of the cooling box on the back of the main machine.
2.
Always obey local laws and regulations if you need to dispose of a tank or the propylene glycol
3.
coolant.
The tank must never be emptied directly into a local drainage system, river, pond, or lake.
4.
Contact a professional industrial waste disposal organization and ask them to dispose of the tank.
5.
Lithium Batteries for Taiwan