Specifications; Function Specifications - Contec IPC Series User Manual

2. Specifications

Function Specifications

Table 2.1. Function Specifications
Item
Screen
Assembly type
Screen size
Number of pixels
Display type
Number of colors
Brightness control
Backlight control
Display interface
Input signal
LVDS input
specification
DVI-D input
Cable length which
recommends
Touch panel
Resolution
Detection method
Touch life expectancy
Touch panel interface
Touch panel driver *3
(download)
*1 Optional desk stand IPC-SND-03 allowing desktop installation
*2 Using a cable longer than 5 m may reduce the image quality. The cable should be as short as possible as
degradation. the image quality may result even when the cable is 5 m or shorter depending on the type of host
computer or cable.
*3 For more details on the supported OS, or to download the latest version of software, visit the CONTEC Web site.
FPD-L71ST-DC1, FPD-H71XT-DC1
FPD-S71VT-DC1
Panel mounted, desktop *1
6.5 inches 12.1 inches
640 x 480 dots 800 x 600 dots
TFT Color LCD
262,144 colors
Adjustment using the front switch or software control from the host
computer
Can be turned on or off by a front switch or via software control from
the host computer.
LVDS input (26 pin half pitch connector)
DVI-D input (24 pin DVI (Female) connector)
26 pin half pitch connector *2
Digital RGB (complies with TMDS) *2
5m or less
4096 x 4096
Resistive-layer analog method
One million repeated touches
(as tested by mechanical touching under 300g of force at a rate of two
presses per second)
Connect to the host computer using either USB or RS-232C.
RS-232C : built-in LVDS/DVI Connector
USB: USB1.1-compliant, TypeB Connector
Compatible with Windows XP or later
Specification
FPD-L71ST-DC1 FPD-H71XT-DC1
15.0 inches
1024 x 768 dots
2. Specifications
5