Front Sw For Backlight Control - Contec IPC Series User Manual

Front SW for Backlight Control

These products have a SW for backlight control on the front side. Backlight ON/OFF and the
brightness adjustment can be done with this switch.
The backlight can be controlled by the software control from the host computer side.
It turns on or off the backlight.
If there is no video signal input, backlight does not turn on.
All the settings can be reset to the factory defaults by turning on these products while holding down
this key.
+ It raises the brightness one rank up.
Keeping pushing this button raises the brightness up to maximum.
It lowers the brightness one rank down.
-
Keeping pushing this button lowers the brightness down to minimum.
FPD-L71ST-DC1, FPD-H71XT-DC1
3. Part Names
15