General Specifications - Contec IPC Series User Manual

2. Specifications
Table 2.2. Power Supply Specifications
Item
Power supply input part
Power supply connector
AC adapter jack
Input power supply voltage
Consumption current *1
Consumption current
(power save mode) *1
*1 When +12VDC is input.

General Specifications

Table 2.3. General Specifications
Item
Environment
Operating temperature *1
Storage temperature
Operating humidity *2
Floating dust particles
Corrosive gas
Noise Line noise
resistance
Electrostatic
withstanding
voltages
Vibration resistance
Shock resistance
Structure
Physical dimension (mm)
Panel cut dimensions (mm)
Mountable panel thickness
Weight
Waterproofing and dust-
proofing
Standard
*1 In the installed angle which is recommended.
*2 Wet-bulb temperature 38ºC or lower.
*3 When using the optional AC adapter IPC-ACAP12-04A.
6
Specifications
FPD-S71VT-DC1 FPD-L71ST-DC1
4-pin connector for +12 - 24VDC power supply
Corresponding to +12 (±5%) VDC output AC adapter
+12V-24VDC±5%
0.6A (Max.) 1.4A (Max.)
0.4A (Max.)
Specifications
FPD-S71VT-DC1 FPD-L71ST-DC1
0 - 50ºC (0 - 40ºC when using an AC adapter)
-10 - 60ºC
10 - 90%RH (No condensation)
10 - 85%RH (No condensation) (When using the AC adapter)
Not to be excessive
None
AC line: 2 kV *3, Signal line: 1 kV
(IEC1000-4-4Level3, EN61000-4-4Level3)
Contact : 4 kV (IEC1000-4-2Level2, EN61000-4-2Level2)
Airborne : 8 kV (IEC1000-4-2Level3, EN61000-4-2Level3)
10 - 57 Hz/Single-side amplitude or 0.075 mm
57 - 150 Hz/1.0 G in the X/Y/Z directions for 40 minutes each
(Conforming to JIS C0040 and IEC68-2-6)
10 G in the X/Y/Z directions for 11 ms; Half-sine wave
(Conforming to JIS C0041 and IEC68-2-27)
210(W) x 40(D) x 316(W) x 46.5(D) x
166(H) 256(H)
199.0(W) x 303.0(W) x
155.0(H) 243.0(H)
1.6mm - 7mm
1.3kg 2.8kg
Front part conforming to IP65
VCCI classA
FPD-H71XT-DC1
0.9A (Max.)
FPD-H71XT-DC1
373(W) x 46(D) x
304(H)
358.0(W) x
289.0(H)
3.6kg
FPD-L71ST-DC1, FPD-H71XT-DC1