DELTA DORE TYBOX B+ Quick Start Manual

TYBOX B+ Quick Start Guide (also for TYBOX 137)
Before you install this product, please read the following key points & for any technical queries please phone 020 7660 2919:
• The thermostat and receiver are PRE-ASSOCIATED, simply connect the receiver to the boiler and insert the batteries into to the thermostat.
• The receiver can be used as 230v or volt free. In most cases wiring is directly to the thermostat input in the boiler via the RT 24V input or RT 230V
input. Refer to the wiring diagrams below for more information, or contact our technical team (020 7660 2919).
• Choose between 1 day/7 day programming via the black switch located inside the back of the unit. (one inch below the battery housing).
• This unit is boiler plus compliant – it includes time and temperature controls, and fulfils the load compensation function.

Thermostat configuration

1. Set the Date and Time
2. Set the Program
3. Set the Temperatures for the Program
Boiler Plus
Compliant
symbol on the menu. Then using the + and – set the day, then press OK, then the
a. Turn the wheel to the
month, then press OK and finally the year, then press OK.
b. Set the Hours, press OK to confirm, then minutes and press OK to complete the date and time set up.
a. Turn the wheel to the PROG symbol. Display shows: the days of the week along the left-hand side starting at 1
(Monday), the time starting at Midnight and the program bar from 0hrs to 24hrs along the bottom.
b. The buttons on the right-hand side are used to program each day, by either selecting the
(or comfort) or the symbol for OFF (or setback), for each time interval required.
c. Start by repeatedly pressing the
press the
symbol repeatedly for as long as required (until 08:00). The program is now set as ON between
6am and 8am. Proceed with programming the rest of the day as needed until 00:00.
d. To copy the program to the next day press and HOLD the OK button until the arrow moves from 1 to 2. You can
copy the program as many times as required or press the OK button only once to repeat the above process for
the following day, adjusting the timings as needed.
e. Visit the Delta Dore YouTube channel (use QR code at the top of this document) for a tutorial if required.
Turn the wheel to the
To set the ON (or comfort) temperature for the
OK (Recommended: 19°C). Do the same for the OFF (or setback) temperature for the
(Recommended: 16°C). Finally set the temperature for the
(Recommended: 8°C). Press OK.
Open the camera on your iPhone
and hold over this QR code to
open an instructional video (for
android you must also hold the
home button), or visit the Delta
Dore UK YouTube channel.
symbol until the time you need it to turn on in the morning (06:00). Then,
symbol.
symbol, adjust by using the + and -, then press
symbol for ON
symbol
symbol which is your Frost Protection