DELTA DORE DELTA 8000 TAP RF Installation Instructions Manual page 5

3/ THERMOSTAT CONFIGURATION
Turn the selector knob to
Press OK.
The screen displays CF01.
• Press + or - to select the menu.
• Press OK to enter the setting mode,
then + and - to perform the setting.
Temperature management
HEAT/COOL mode management
8
.
Master Zone
thermostat thermostat
Controlled zone Controlled zone
All zones Controlled zone
All zones -
Correction of the
measured temperature
Temperature displayed
in normal mode
Ban on the Cool
regulation on the
Thermostat's thermal
zones (if SW2 = ON on
of the associated output
Thermostat type
CF03 only appears in Heat/Cool generation mode (SW2=ON,
CF05: The Master thermostat enables centralised ON/OFF
and HEAT/COOL operations to be performed (according the the
+/- 5°C in increments of
0 Setting display
1 Display of the measured
temperature.
No ban (default
0
1 Ban
0
1 Yes
Zone thermostat
0
1 Master thermostat
9
EN