1/ Installation - DELTA DORE DELTA 8000 TAP RF Installation Instructions Manual

1/ INSTALLATION

Since the temperature measurement sensor is inside the box, you
must install the thermostat:
- wall-mounted or placed on a shelf or a piece of accessible furniture
at a height of 1.50 m.
IMPORTANT: Do not install the thermostat on a wall in contact
Separate the box from its base unit by pushing the pin using
a screwdriver.
Remove the batteries.
Attach the box with suitable screws to the mount or mount the
thermostat onto its base unit.
Insert the batteries.
Mount the thermostat front panel.
4
1
2
3
environ
1,50 m
Mini 20 cm
4
EN
OR
3
5
5