Extreme Networks ExtremeWireless AP460i Installation Manual page 25

Install the Access Point
Procedure
1. Using the vehicle assembly plate four long inner slots as a template, mark and drill the attachment
holes on a flat surface.
Figure 9: VMM vehicle attach assembly plate
Callout
1
2. Attach the vehicle attach assembly plate using four screws or bolts.
The screws or bolts must be tightened to hold the bracket and the access point in all environmental
conditions.
Install the Access Point on a Hard Vehicle Surface Using
Description
Inner slot on the VMM vehicle attach assembly plate
the WS-MBV-VMM Vehicle Bracket (#32216)
ExtremeWireless™ AP460i/e Access Points 25